Now neither windows 7 or 8 will. Once done, replace old with new. After trying again I got the error 0x80070570 at around 70% this time. Something must have jiggled loose in the fall. The easist thing to do would be to contact Acer and get recovery cds then go buy a new hard drive.
Press the right arrow key to select Main. I think I'll need to reinstall whatever partitions etc. Pease send more information, we'll assist you further. But I think this will resolve the problem. All I did was take the install.
Hey, no joke, this same thing happened to me. In case the F12 option does not work, you may need to enable this function. Leave a Reply Your email address will not be published. Then when I press enter to get to the boot manager it does not show any options. Unfortunately, any data on the old drive will be lost.
Most likely you have lost your hard drive and the netbook is simply trying to find the next boot device. You can also refer to the computer manual. Aug 06, 2011 Try this : What is WinToFlash There may come a day that optical drives are as hard to find as 5. There is no easy solution to your problem. Go to the Exit tab and choose Exit Saving Changes.
I'd also like to install windows 8. Check to see if the Hard Drive is properly fitted properly docked into its socket and screwed down or held down properly so it is immobile during use. But after I set to reset my Windows 8. Once there, go down to Secure Boot and switch it from enabled to disabled. Feb 21, 2011 Hi, To change the bootable device you need to go to bios setting.
Once you properly burn to disc you can proceed. I then powered on my acer with no problem! You can change the Secure Boot setting and it should recognize the bootable device. Then insert all again then it should work. Everything is here to get and keep a perfect. Here's the article I used to make mine. Nov 07, 2011 Not necessary.
So you have many options now. I think I'll need to reinstall whatever partitions etc. But in another drive I'm having the windows 7 files. Jun 06, 2011 The uProcessor can't find a bootable device and presumes your hard drive is no longer plugged in. Here are a couple solutions. Is uefi usable only with windows 8+? I have follow the steps here Now for some reason I am not able to get the win 8 installation screen error 0xc000000f.
Follow the on screen instructions. Depending on your computer make and model the way to go to bios could be different though generally you can go to bios by continuously tapping on F1 or F2 or F9 or F10 or F11 etc The moment you press the power button and you see flashing brand scree like dell, hp etc. Insert the Installation Disk into the disk drive of the computer. Use the right arrow key to select Boot Options. I've tried pressing alt + f10 and it does not work. It's an older laptop from 2010 and I took the W10 upgrade and now I want a fresh clean machine.
With Secure Boot highlighted, press Enter and then the down arrow to select Disabled. Acer Aspire E1-570 Was working fine yesterday and this morning it just randomly comes up with no bootable device. However upon plugging back into the laptop it gave the same problem. But it was failing at about 33%. Posted on Jun 03, 2009 No bootable device suggests that your Acer Aspire hard disk may have been damaged when the computer was dropped.
The computer will restart and hopefully boot into the operating system Please post back if you need anymore assistance. Use the right arrow key to select Authentication. Once there, go down to Set Supervisor Password and set an easy password that you will remember. I have since formatted the drive and installed Windows 7, but now I get an error stating the above, No Bootable Device, Hit Any Key. You don't have to worry about scratches on the disc or misplacing your original media discs once you transfer their contents to the flash drive. Actually I'm dual booting system which Windows 7 and Windows 8.