Didn't read your wall of text use paragraphs next time but you're probably doing something wrong if you tested it with all that gear and still can't get it to work. Has cut my time on site by a good 30%. I just verified that the setup you describe works. Later they updated the firmware and that issue was gone. I use them together with Nikon cameras. You can do the math on dollars, and on pieces of stuff to track, transport, setup, tear down, and transport back.
All other groups are off. Godox are aware of this issue, though its not really a bug. To close, you do get what you pay for. Figure 1-1 Godox supports Nikon, Canon and Sony camera systems per Aug. Please do provide your kind support.
Rated 5 out of 5 by David from Great value vs. They now offer a lithium which would be worth it. They were plagued with sync issues at first, nearly 50% of shots at times were only half in sync with the flash at or below xsync! Not one issue with either my D750 or my D7200. The other option may be to stack the Rimelite radio transmitter on top of the X1T-S transmitter on the camera hotshoe. For the record, I have tried many things and with an external flash it works, although sometimes also recently I have to fit the flas one or two times on the hot shoe before it connects.
They seemed like a dream come true. It allows for light modifiers with Bowens speedring, for umbrellas with shaft, and for light modifiers that directly snap on the 150mm front disk of bracket. Paired with a light meter this is great to tweak the flash heads in manual mode. When changing cameras, press the test button on the transmitter of the camera you are switching to. If i get the X1-S transmitter would they communicate with a X1-C canon Receiver. I tried the X1T-C transmitter in my Sony A7 hotshoe, and that fires fine in manual mode. Then, P output value , T flash times and H e.
Ended up selling my Nikon Speedlights and going all Godox. To solve the compatible problem of new camera models e. I've used the speedlight as a controller and the X1 R2 transmitter. Good to learn that you dont have an issue, can you please confirm if you use them in manual mode or auto. Hi, I am planning to buy a godox x1t-s to trigger lights and Sony a7r camera shutter in the same time.
Perhaps Godox will bring out another strobe that has a a real modeling light at least 250w equivalent and b enough cooling to just keep firing. Are there actually any reliable, ttl capable radio triggers for Nikon? Are you meaning with a Canon speedlite attached to the X1R-C, or using a studio strobe with long duration sync etc? Therefore, usability of the slave flashes, master flashes and transmitters are of high importance. The original version XproC V1. That would complete the lineup. I use both Sony and Nikon cameras. Tested on two D750's and a D600.
Your support is greatly appreciated. Although the Bowens mount is the preferred option because it is the same mount as on the monolights and studio lights, the other options just increase the flexibility. Fn menu now names both the functions and their values. That is not what has affect the results with the three trigger brands I have tried though. Sony warns against third party triggers relating to voltage! I have the Flashpoint R2 Trigger. I bought them three separate times, made sure to get the latest updated version, still had the same problems. I should have listened to sharp people like David Hobby and just acquired good stuff right away.
So why are there not more people talking about these bugs? The main functions can be controlled from the X1-N, via built in 2. This enables the adjustment of settings such as sync delay and triggering modes. I am using latest firmware on the A6500 1. I know that and personally tested that. But that does not work. On the right is the C.
Just for the self-timer countdown? Could it be that the two flashes interfere when light gets measured? It is also a lot cheaper than these premier brands. At the time of writing the Godox 2. Tested on two D750's and a D600. In manual mode, they work fine, high speed sync works fine as well, just ttl exposures are out of whack. Hi ackbar, I just tried the X1T-S transmitter mounted directly on a Canon camera hotshoe, and it would not fire.
All these stores offers stellar service, both before and after sales. I tested these triggers on two D750 bodies and a D600 body. Using Nikon's optical system in the same exact scenario gave near perfect results every time. To strengthen the wireless transmitting signal and decrease the odds on not triggering in the interference of external 2. Using Speedlights with Godox Flash Brackets Godox flash brackets add extreme flexibility in adding light modifiers to portable flash units and to speedlights.