I'm not a Chevy guy but I love this body style! The tabs on the edge of the rails are bed mounts. We carry a wide variety of Chevrolet accessories including dash kits, window tint, light tint, wraps and more. In this view, you can see where the 2X5 main frame rail meets the rear 2X4 box tube rails, just to the rear of the 4-link mounting bracket. This chassis features the optional power Mustang rack that bolts in the same mounts as the standard manual rack. Trust Ecklers for all of your restoration and replacement needs for your truck, racer, show car, street rod, or daily driver. This car runs, and it runs strong. Remember, all of our chassis have an adjustable stance in the front-and-rear about 4-inches.
Our '60-72 pickup chassis features 2X5 main center frame rails and 2X4 box tube frame rails over the front-and-rear suspensions. We offer two different styles of rear lower coilover shock mounts or ShockWave air suspension mounts. Some devices require an adaptor or back cover. Both brackets will offer you an adjustable stance at the rear. Services subject to user terms and limitations. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.
The off-set bracket can also be flipped over for another 1-inch of movement. At the front of the chassis, the optional rounded frame horns will accept stock bumper brackets. The only thing original on this bronco is the tub and frame. If you want your ride down in the weeds this is the only way to go. We offer adjustable aluminum coilover shocks that are available with adjustable rebound or adjustable compression with one-knob or a two-knob adjustable model: one knob for rebound and one knob for compression or a single-knob: rebound only style or the non-adjustable coilover. We also build a new custom-width round-back 9-inch housing with Dutchman alloy axles for your chassis. Services are subject to User Terms and limitations.
With its available Duramax 2. This equates to 4-inches of suspension travel for both front and rear wheels. The weight of passengers, cargo and options or accessories may reduce the amount you can tow. Besides acting as a motor mount, the tube adds strength between the front crossmember and the frame rails on both sides. Looking into the back of the '67-72 Chevelle spindles, reveals the Jim Meyer beefy 1-inch thick bolt on steering arms that replace the stock front-steer arms. Oh, and I was just joking about the purists, I have complete respect for the work it takes to restore any vehicle to factory spec.
Your pickup chassis can ordered with up to a 10-inch step over the rear suspension, while the front chassis step is available up to 4-inches more then stock. It's a quick little sleeper, as you could imagine. Wilwood hubs offer only 5-on-4 ¾ or 5-on-4 ½ for their 12. The Jim Meyer Racing Products chassis package offers up to a 10-inch step over the rearend, while the front chassis step is also available up to 4-inches more than stock! Again, either of these brackets will hold the coilover shock or the rear ShockWaves from Air Ride Technologies. Your chassis can be ordered with just about any optional modifications including the ShockWave remote operated air suspension system.
My Camry runs great, I've driven it 16k+ miles since last year. You will be charged at then-current rates. I've taken her from Austin to Dallas 3. Class is half-ton full-size pickups. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.
The weight of passengers, cargo and options or accessories may reduce the amount you can tow. Looking at the front of the rear 4-link bracket, you can see our 1-inch diameter X. Its just not my style. Cargo and load capacity limited by weight and distribution. All rear brake packages feature a parking brake.
This crossmember adds more strength to the frame since it is welded on the inside of the rails and on the outside of the rails as well. Cargo and load capacity limited by weight and distribution. Cargo and load capacity limited by weight and distribution. See the next two photos. Your actual range may vary based on several factors including temperature, terrain, and driving technique. Joek, I'll keep you in mind when I go to sell the frame, and drivetrain.
Click here to see all Chevrolet vehicles'. For superior handling and cornering, our 1-inch diameter antisway bars front-and-rear are must have items. An exterior doubler-plate is always used to reinforce this grafted connection. Click here to see all Chevrolet vehicles' destination freight charges. Just in seafoam green like the one I used to own. The weight of passengers, cargo and options or accessories may reduce the amount you can tow. This upper bracket can be moved about 3-4-inches for the stance you like best.
Two ½-inch Allen bolts secure the bracket to the upper A-arm tower. These will fit on our standard Chevelle spindle. For important tire and wheel information, go to or see your dealer. Different steps over the rear suspension are available, up to 10-inches and over the front up to 4-inches. The big steps over the rear suspension will require a newly shaped bed floor that goes over the rails, but it sure gives a killer on-the-ground stance when finished. The weight of passengers, cargo and options or accessories may reduce the amount you can tow.