That means your brake lights will be seen easily even on the brightest summer day. Peal graphic from backing paper. If you end up with extra material at the end, and you may depending on how much you stretch the film during application. Please be aware of and obey all applicable laws regarding tail lamps. Top to bottom there is a little extra material to allow for variances in the doors. Contact us today and tell us what you drive, and your plans for it. I prefer to apply these graphics dry but if it is easier you can do them wet with a spray bottle of water and one drop of soap.
Taillights are one of only a few components that are all about looks, so enjoy the chance to play around with different designs and configurations. Additionally, they come in pre-tinted designs -- a lot of people spend a great deal of time and effort overlaying the stock lamps with vinyl to try to achieve a non-chrome look. The compatibility of selected lacquers and paints should be tested by the user, prior to the application of the material. Granted, some drivers are brand purists that want to stay true to the original look of their vehicles. You do have to run a couple of new wires, but taps and wiring are included. Or try an overlay to give your lights a dramatically different look with minimal work and investment. Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other contamination that could affect the adhesion of the material.
A new set of taillights from Modern Automotive Performance will help increase the visibility of your brake lights and give your car a sharp new look. You can trim the end with a razor blade or wrap it around the door trim. These graphics are exact in length. Installation is very straightforward -- see details. Looking at you, third-generation Mustang drivers. On the front graphic for the front driver and passenger side door. Freshly lacquered or painted surfaces should be allowed to dry for at lease three weeks and to completely cure.
. I would start to apply towards the rear of the door and work your way forward. An upgrade over stock can give your car a truly unique look that turns heads. Align one corner and work your way down the door making sure the vinyl is covering top to bottom. . .
. . . . . . .
. . . . .
. . . . . . .
. . . . . . .
. . . . . .
. . . . . .