Do not attach safety chains to the bumper. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision. Do not wipe off any grease on the battery terminals on the back surface of the circuit board. Always set the parking brake fully and make sure that the gearshift is securely latched in P Park. Note: The eighth turn must end in the 4 on position. Charging system: Illuminates when the battery is not charging properly. At the end of the 2014 model year, Ford discontinued the E-Series vans.
To install the lamp, follow the removal procedures in reverse order. These additives may prevent piston ring seating, maintenance and Specifications chapter for more information oil, for a detailed description of what is covered and what not covered by, your vehicle's New Vehicle Limited Warranty, refer Warranty. Use only Ford recommended replacement fasteners. As such, they cannot be treated like normal light truck tires. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. Check the fluid level on the dipstick. Remove bulb socket from lamp assembly by turning counterclockwise.
If a replacement oil filter is used that does not meet Ford material and design specifications, start-up engine noises or knock may be experienced. Replacing side marker bulbs 1. Remove the panel cover to access the fuses. Air flow selections: Controls the direction of the airflow in the vehicle. Reconnect the primary battery positive cable. Route the child safety seat tether strap over the back of the front right-hand passenger seat as shown.
It is distilled from the fermentation of plants such as field corn and sugar cane. BodyTypeFilter selectedBodyTypeGroupIdList, bodyTypeGroupIdToNameMap, null ; bodyTypeFilter. See Warning lights and chimes in the Instrument Cluster chapter for more information regarding the warning lights. If your vehicle requires professional service, your authorized dealer can provide the necessary parts and service. Windshield washer fluid reservoir 2. Clip the end of the belt to the stationary portion of the shoulder belt coming out of the trim panel.
If the top edge of the high intensity area is not even with the horizontal line, follow the next step to adjust 5. The automatic locking mode is not available on the driver safety belt. S and Canada should contact 1-800-444-3311. Engine oil filler cap 7. If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. It also covers the motorhome chassis for van-based motorhomes covers the part made by Ford only, not the motorhome body.
Route the child safety tether strap over the back of the bench seat. Use of your Ford light truck as an ambulance, without the Ford Ambulance Preparation Package voids the Ford New Vehicle Limited Warranty and may void the Emissions Warranties. The oil from your hand could cause the bulb to break the next time the headlamps are operated. Traction control is optional on models without the stability control system. You should always carry a second key with you in a safe place in case you require it in an emergency.
The jack is only meant for changing the tire. Copyright © 2007 Ford Motor Company. However, if fluid is added at this time, an overfill condition could result when the vehicle reaches normal operating temperature. The engine must warm up to its normal operating temperature. Department of Transportation-Tire quality grades: The U. Accelerate to the desired speed.
Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Allow the belt to retract. If the engine idle speed does not slow down automatically, have the vehicle checked. The tool needs to be held against the tire sidewall opposite the valve stem as illustrated with the arrow on the tool pointing towards the rim;. Inflate all the tires to the recommended inflation pressure.