Its built-in ultraviolet inhibitors prevent the material from discoloring, and its self-healing technology delivers unsurpassed scratch resistance. Hello, About a year ago I ordered the WeatherTech Lampguard kit for my 2001 Toyota Tacoma. When I received the kit, I was a bit skeptical as I was initially intimidated with the steps. I have previous experience with window film and the carbon fiber film so I tried to install it by myself and one headlight came out really bad and the other was a total loss. Our goal is to keep our customers happy for a lifetime and always reach a fair resolution to any issue. There's a little movement of the film when using the squeegee but you can use your fingers to move it back into place. One cleared up beautifully, but the other was still a little hazy no matter what i tried.
Although, very few and seemingly simple, I was immediately concered about being able to curve the protector over and around the headlight. Both headlights came out crystal clear. It may require significant pressure to pull the plastic away from the headlamp, but normally the LampGards peel off without any residue left on the lens. Take your time and you'll have no problem with the installation. We recommend that you seek professional assistance if you are continuing to have installation issues.
In most cases, we have found that the wet installation yields the best-looking installation. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs. It is important to read the instructions first before attempting to apply the product and to be carefully around the curves of your lamps. The headlights were in poor shape with foggy lenses. I used similar ones when I lived in Alaska and they still looked very good after ten years use. I installed these today by myself with no problem. Once installed, I was concerned about all of the moisture trapped under the material.
I have previous experience with window film and the carbon fiber film so I tried to install it by myself and one headlight came out really bad and the other was a total loss. I never heated the lens when applying. You will need a helper. Installation WeatherTech recommends professional installation, but LampGard comes with easy-to-follow instructions and applies to headlamps, fog lamps, turn indicators and parking lights when applicable to protect them from scratching and pitting. I never heated the lens when applying. We are reasonable people and we believe in true customer satisfaction. These things softened right up with a little heat, they stuck and moulded right on to fit like a glove! LampGard Headlight Protection offers exceptional protection for your headlamps.
Protect your lights from scratching, pitting and staining with the WeatherTech LampGard. They will look a little hazy for two weeks or so but they will cleared up. I installed these today by myself with no problem. I can see how the Lampguards offer increased strength and protection to my plastic lenses. I have already been through the car wash several times without incident. This is completely normal and is no cause for concern. Having a problem with your car headlights means you are not as capable of seeing well at night or in bad weather.
I am a happy customer! This is a quality product and I do recommend it. This note is just to say Thanks for supplying a good product! The film is very thick and hard to work with if you can't keep it heated. One cleared up beautifully, but the other was still a little hazy no matter what i tried. You will need a helper. I had no baby shampoo in the house so I used our Ecos natural laundry soap due to the mild properties.
The ad made them sound great, so I placed an order. I threw the package on a shelf and figured that I had wasted some forty dollars, and that I should have known better anyway. Its built-in ultraviolet inhibitors prevent the material from discoloring, and its self-healing technology delivers unsurpassed scratch resistance. Once the excess is properly spread about the perimeter of the LampGard, the material will easily lay flat on the lens. There's a little movement of the film when using the squeegee but you can use your fingers to move it back into place. Headlights grow dimmer by up to 20% over time and eventually burn out - for this reason, we recommend changing your headlights in pairs.
When working toward the edge, spread the excess material out rather than working it all into one spot. These things softened right up with a little heat, they stuck and moulded right on to fit like a glove! That does not mean that a product that simply and naturally wears out from normal use is a candidate for a warranty replacement or a refund. Therefore, you should turn your automobile's headlights on and make sure they are set on low beam so that you can better see what is in your path of travel. We do not charge extra for our products to our vast majority of customers so we can accommodate ridiculous warranty claims by the few. I used similar ones when I lived in Alaska and they still looked very good after ten years use. If a problem occurs the bulb that is in question can be replaced, leaving the others untouched. I am very pleased with these covers.
Some air bubbles were trapped under the covers after installation. LampGard is made of a high-performance polyurethane film that is virtually invisible and applies directly to the lamp surface. In some Mazdas, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb and vise versa. We will work with you for a fair resolution to any issue you may have. We are very satisfied with the results and will be purchasing this product for our other car.