Open the fuel door and loosen the fuel cap to vent the tank. From 1997 until 1998, they had four disc brakes, two of which were ventilated, and an anti-lock brake system. These trucks had different power capabilities depending on the year. To check the fuel pressure specification, you'll need a fuel pressure gauge, a small tool available at most automotive stores. The fuel-pressure specification between the V-6 and the V-8 engines is different. Trucks with either the 5. The 1998 Silverado was available with three engines: a 4.
The Silverado's fuel system is a complicated network of parts. Depending on the production year, they had a curb weight of 3,829 to 4,127 lbs. If the fuel pressure is too high, the most common symptom is an engine running rich, which can cause performance and efficiency issues, as well as emissions issues. From 1992 until 1996, these trucks featured four disc brakes, two of which were ventilated, and an anti-lock brake system. Hook the fuel pressure gauge to the test port on the engine's fuel rail, located on the passenger side of the engine compartment. Turn off the 1998 Silverado's engine and open the truck's hood. It had a bore of 4.
One of the trim levels for these trucks, the Cheyenne, was available as a trim level from 1992 until 1998. . The fuel system will pressurize and your gauge will give you an accurate reading. If the fuel pressure is too high, the most likely cause is a bad fuel regulator or a clogged fuel return line. After 1995, they had a compression ratio of 9. These trucks were available with so many different comfort, convenience and powertrain options that they could be tailored to suit the needs of just about any truck owner. In the early 1990s, the trucks featured a compression ratio of 9.
They had a wishbone front suspension with a stabilizer bar and a rear suspension that had a stabilizer bar and leaf springs. They had an independent, torsion beam front suspension with a stabilizer bar and torsion springs and a rigid, beam rear suspension with a stabilizer bar and leaf springs. If the fuel pressure is low, common symptoms include rough idling and engine hesitation. For fuel pressure problems, it's best to seek the assistance of a Chevrolet dealer or a certified mechanic. As long as the fuel pressure is within the normal range, the fuel system is likely operating normally. If your Silverado's fuel pressure is too low, common causes include a clogged fuel filter and a bad fuel pump or fuel pump relay.
The fuel pressure specification for the 1998 Chevrolet Silverado truck is from 55 to 61 lbs. In 1995, they featured a compression ratio of 9. . . . . .
. . . . .
. . . . .
. . . . .